Functional safety/PL level assessment certification for power tools
·One-stop solution for functional safety
On May 15, 2020, the German National Technical Safety Committee Center ZLS updated the EK9-BE-91 (V3) previously released on March 9. This revision further clarifies the requirements of GS certification for battery charging systems (BMS). In response to the functional safety requirements of the new version of the EK9 resolution, a one-stop functional safety solution is provided for power tool companies to help products pass smoothly into the international market!

Service Overview
On May 15, 2020, the German National Technical Safety Committee Center ZLS updated the EK9-BE-91 (V3) previously released on March 9.
This revision further clarifies the requirements of GS certification for battery charging systems (BMS).

Scope of application of the new resolution: battery-powered power tools, garden tools and other mechanical products marked with the GS mark under the Machinery Directive.

The new version of the EK9 resolution proposes the following for lithium battery-driven power tools, garden tools and other mechanical products:

"BMS must have the detection and protection functions for the three parameters of the battery cell (battery cell temperature, battery cell voltage, battery cell current), and the reliability performance level of these three key safety functions must meet PLr = c. The relevant hardware is evaluated according to EN ISO 13849-1, and the relevant software is evaluated according to Annex H of EN 60730-1, and the software level is required to reach Class B."

Service Content
In response to the functional safety requirements of the new version of the EK9 resolution, SGS provides a one-stop solution for functional safety/PL level assessment and certification for corporate power tool products, helping products to pass smoothly in the international market!

Evaluation items
Power system integrity Safety circuit diagnostic solution evaluation Safety control circuit safety related parameter evaluation
Software system capability Software architecture design Software module design
FMEA single fault failure analysis Software process evaluation Product test report
Environmental test report Software change management, configuration management and version management
Software verification test report evaluation, etc. System safety functions and performance levels meet the requirements of relevant clauses of IEC62841

Related standards (including but not limited to)
EC 60730:2011 ISO 13849 - 1:2015

About Us

Shenzhen LCS Compliance Testing Laboratory Ltd., abbr. for LCS, was founded in 2004 in Shenzhen, LCS is now growing into an independent comprehensive third-party institution which focuses on test & certification. Profound technical background and diligent working attitude decided LCS with an outstanding high starting point from the outset，pioneering spirit and consciousness of keeping pace with the times which predestined the thoroughly tempered course of LCS.

Our Labs

LCS Founding Members have engineering background and had gradually built up Safety Lab, EMC Lab, RF Lab, SAR & HAC Lab, Reliability Lab, Lighting Electrical Lab, LED Lighting Performance Lab, Energy Efficiency Lab, Electronic Cigarette Testing Lab, Chemistry Lab, BQTF, Environmental and Occupational Evaluation Lab, Battery Lab, Toy Lab, Textile Lab, Food and Food Grade Material Lab. The establishment of our comprehensive labs ensure our test and certification scope covers almost all fields, such as Reliability and Safety test, EMC test, Chemical Hazardous Substances test, Material Analysis, Food Contact Material test, Bluetooth Test & Certification, Environment and Occupational Health, Performance test of spare parts of Automobile and so on.

Authorization

Moreover, LCS won many authorized qualifications both domestic and overseas. LCS is recognized as IEC/ISO17025 laboratories accepted by CNAS and NVLAP, accredited by CPSC, CMA, accredited for CQC, ISTA, CBTL, SASO, SABS. Meanwhile LCS become laboratory authorized by TUV, BQTF issued by the SIG. LCS had also signed cooperation agreements with FCC, ISED, ETL, CEC, UL, E-Mark, CETECOM, KTC, SAA Approval and many other authoritative institutions, hence we can provide our clients with efficient and professional service for product test and certification.

Experience

Our RF experience ranges from WLAN (802.11b/g/n/a/ac), Wi-Fi 6E, Bluetooth (802.15.1), ZigBee (802.15.4), Z-Wave, UWB (802.15.3), WiMAX (802.16), SRD, DECT, RFID, NFC, GSM, WCDMA (+HSDPA/HSUPA), LTE, 5G (NR/VoNR/eMTC/eMBB/URLLC),UHF/VHF, WHDI, AM, FM, DAB, DVB, GPS, GNSS, COMPASS, GLONASS and more. The products we are mostly working with are basestations, client adapters, laptops, cordless phones, baby monitors, cellulars, radars, sensors, scanners, receivers, immobilizers, remote controls, etc. Modern products incorporate not often one, but a variety of co-existing technologies.

Welcome

LCS is a reliable party. With more than 20 years hands-on experience in the field of Radio, Telecom, EMC and Safety certification, including country approvals worldwide, we will guide you with our knowledge. You are very welcome!

We will be pleased to assist you with your questions or inquiries, please contact us.